The GTM Supercar Build Log

Passenger Seat Installed

Tackled the passenger seat tonight. To determine where to drill the holes for the seat I taped intersecting lines across the bottom of the seat where I wanted to mount the bolts (flat surfaces at the front and rear of the seat), then set the seat in the car and marked the carpet with more tape where the tape on the seat met the carpet. Pulled the seat, connected the lines, and then knew where I needed to drill the frame out. After some trial and error, I got the mounting points just right, then installed some rivnuts in the seat and set it in the car. I only had one bolt on hand long enough to bolt the seat down, so I will have to pick up some more at the hardware store later.

Leave a Reply

You must be logged in to post a comment.