Coolant Hardlines and Shift Cables Secured, Sound Dampening
Tonight I just took care of some little things. I secured the coolant hardlines to the frame with some insulated clamps, and then did the same for the shifter cables and rear-end wire loom. Afterwards I put Dynamat on the rear tunnel/engine cover piece that goes over the alternator. I plan on making this removable so I dampened it separately from the other tunnel pieces.
I also extended some wires to reach the fuse box post.
This entry was posted on Tuesday, March 31st, 2009 at 12:47 am and is filed under Heating and Cooling, Sound Dampening, Wiring. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.