The GTM Supercar Build Log

Clutch Pedal Modification and Rear Brake Lines Tightened

I removed the clutch pedal tonight for modification. Josh will be cutting off the right side of the pedal and welding it on the left side of the pedal so I have more room between the brake and clutch pedals. I will then repaint the pedal and reinstall.

I also finally tightened up the rear brake line fittings. The braided lines I am using have made it tricky to get a spacer in between the fittings to hold them flush and secure against the aluminum panels they pass through so I took the Dremel and notched out the fitting lips a bit so I can slide some spacers in between the aluminum panel and the fittings. Worked great.

Leave a Reply

You must be logged in to post a comment.