The GTM Supercar Build Log

New Compressor Lines, Wiring Cleanup, and Headers

Today I pulled the compressor hardlines off the compressor and Josh came over with a nice hose crimper tool so we could attach the new hardlines (necessary for header clearance). This went smoothly and the new block was attached in no time.

Afterwards I mocked up the headers (could not install them due to lack of anti-seize lubricant) and cleaned up the PCM wiring quite a bit, including relocating the engine harness so it is routed underneath the engine covers. This called for stripping the harness down a bit to relocate the intake temp sensor back up to the engine.

Leave a Reply

You must be logged in to post a comment.