Finally, the interior is nearly complete. With the driver dash pod re-glued and ready for install I cleaned up some wiring that will be under the dash, wired the transmission oil cooler LED indicator, then installed the pod. Before riveting in place I attached the air duct and dash switches for camera and lights. Dash pod was then riveted into place, and then the gauge face was plugged in and screwed down.  I then threw on the steering column cover and screwed that in place.

This entry was posted on Saturday, July 3rd, 2010 at 11:38 pm and is filed under Interior, Lighting, Wiring. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.