The GTM Supercar Build Log

Hazards Finally Work!

After a long battle, the hazards finally gave in and started working. The proper wiring for the hazards is:

1. Painless harness wire #951 (brown) to black wire on FFR supplied relay
2. Pin A on the turn signal harness connects to the green wire on the relay
3. Red relay wire connects to Pin 2 on the console switch for the hazards
4. White relay wire is grounded
5. Pin 1 on the console switch for the hazards takes any +12v hot wire

One Response to “Hazards Finally Work!”

  1. The GTM Supercar Build Log » Blog Archive » Hazard Switch Wiring Diagram Says:

    […] Revision from  June 14: The wiring below has been modified to what I have posted here: http://www.gtm-supercar.com/?p=1547 #gallery-1 { margin: auto; } #gallery-1 .gallery-item { float: left; margin-top: 10px; text-align: […]

Leave a Reply

You must be logged in to post a comment.