The GTM Supercar Build Log

Headlights Wiring and Horn Install

Next up were the headlights. Also pretty straight forward as long as you have the right tools. A special crimper is needed to crimp the headlight plug pins (thanks Josh). High beam wire to high beams, low beam to low beam, and the driving light gets the turn signal and driving light wires. Each light gets its own ground, 6 in all. Loomed up, it looks nice. I could not install the fog lights as it looks like Factory Five sent me the wrong ones.

Once the lighting was all tested I moved onto the horn install. I installed the horn on the driver’s side. I used the top bolt on the hood-to-body bracket to mount the horn. The bolt fits perfect, and once you bend the tap on the horn mount it fits right on there as if it was meant to be there. Wired it up and tested – loud.

Leave a Reply

You must be logged in to post a comment.